Understanding Your Santoku's Edge
The Santoku knife is a versatile blade that handles mincing, chopping, and slicing with equal skill. Its hollow edge (also called a Granton edge) reduces friction and prevents food from sticking, making it ideal for preparing vegetables, fish, and meat. To keep your Wusthof Santoku performing at its best, regular sharpening is essential.
Product Facts: Classic 5" Hollow Edge Santoku
- Classic 5" Hollow Edge Santoku: The sharp blade of a Santoku allows anything from regular to wafer-thin cuts - it is therefore now indispensable in kitchens all around the world. This versatility means the blade requires consistent sharpening to maintain its ability to produce both everyday slices and delicate, paper-thin cuts.

Classic 5" Hollow Edge Santoku
Choosing the Right Sharpening Tool
For a Wusthof Santoku with a hollow edge, a whetstone is the recommended sharpening tool. The hollow edge does not affect the main cutting edge, so you can sharpen it like any other straight-edged knife. Use a medium grit stone (around 1000) for regular maintenance and a finer grit (3000-6000) for polishing. Avoid electric sharpeners unless they are specifically designed for Asian-style blades, as they may damage the edge geometry.
How to Sharpen Your Santoku with a Whetstone
Follow these steps to sharpen your Wusthof Santoku safely and effectively. The process is similar to sharpening a chef's knife, but pay attention to the blade's angle.
- Prepare the stone: Soak your whetstone in water until bubbles stop rising. Place it on a non-slip surface.
- Find the angle: Hold the knife at the angle recommended in the product instructions against the stone. The Santoku's edge is typically ground at a slightly shallower angle than European knives.
- Sharpen the right side: Starting at the heel, push the blade across the stone in a smooth arc, maintaining consistent pressure. Repeat 10-15 strokes.
- Sharpen the left side: Flip the knife and repeat the same number of strokes on the other side. Keep the angle consistent.
- Check for a burr: Run your finger gently along the edge; you should feel a small burr. This indicates the edge is forming.
- Hone and test: Finish with a few light strokes on a finer grit stone to polish the edge. Wipe the blade clean and test on a tomato or paper.
Caring for the Hollow Edge
The hollow edge indentations on your Santoku are designed to reduce sticking, not to be sharpened. When you sharpen the main edge, avoid applying pressure directly on the hollows. Clean the knife by hand with warm water and mild soap, then dry immediately. The hollows can trap food particles, so use a soft brush to clean them gently.
When to Sharpen vs. Hone
Honing realigns the edge between sharpenings. For daily use, hone your Santoku with a honing steel before each session. Sharpen only when the knife feels dull—typically every few months depending on use. Over-sharpening can wear down the blade faster.


