Back to Blog
How-to Guides 2026-11-13 WÜSTHOF - Official Online Store 1 views

Mount a Magnetic Knife Holder on Tile Backsplash

Mount a Magnetic Knife Holder on Tile Backsplash

Learn how to safely install a WÜSTHOF magnetic knife holder on a tile backsplash using the included bracket and screws. Step-by-step instructions for a clean, secure mount.

Why Mount on Tile?

A tile backsplash is one of the most common surfaces in modern kitchens. It’s durable, easy to clean, and provides a solid wall for mounting a magnetic knife holder. WÜSTHOF magnetic holders are designed to attach to walls or tiles using the included mounting hardware, giving you a clean look with no visible brackets.

What You Get with a WÜSTHOF Magnetic Holder

  • 18" Magnetic Holder: The WÜSTHOF 18" Magnetic Holder can be attached to the wall or to tiles. Two extra-strong magnets hold the knives safely and save space. This confirms tile is a supported surface, and the magnets are strong enough for daily use.
    18" Magnetic Holder
    18" Magnetic Holder
  • 14" Magnetic Holder: The WÜSTHOF Synthetic 14" Magnetic Holder can be attached to the wall or to tiles. Two extra-strong magnets hold the knives safely and save space. The same mounting method applies to the 14" model, so you can choose the size that fits your backsplash.
    14" Magnetic Holder
    14" Magnetic Holder
  • 12" Wooden Magnetic Holder: The WÜSTHOF 12" Wooden Magnetic Holder includes a hidden super magnet and attaches with the included mounting bracket and screws. Even the wooden model uses the same bracket system, so the installation steps are consistent across the line.

Step-by-Step Installation on Tile

Follow these steps to mount your WÜSTHOF magnetic holder securely on a tile backsplash. You’ll need a drill with a masonry bit suitable for tile, a screwdriver, and the included mounting bracket and screws.

  1. 1. Position the mounting bracket: Hold the mounting bracket against the tile at your desired height and mark the screw holes with a pencil. Make sure the bracket is level.
  2. 2. Drill pilot holes: Use a masonry bit to drill through the tile and into the wall at your marks. Go slowly to avoid cracking the tile.
  3. 3. Secure the bracket: Insert the included wall anchors (if needed for your wall type) and screw the bracket firmly into the wall.
  4. 4. Attach the magnetic strip: Click the magnetic holder onto the mounting bracket. The design hides the bracket and screws, giving you a seamless look.

Important Tips for a Safe Installation

Always check that the magnetic holder is securely clicked onto the bracket before placing knives. The WÜSTHOF mounting system is designed to hold the strip tightly against the wall, but proper installation is key to safety. If you’re unsure about drilling into tile, consult a professional installer.

The supplied evidence does not confirm whether adhesive mounting is supported. For a tile backsplash, the bracket-and-screw method is the only documented approach from WÜSTHOF.

Related Articles

Customer Service
Home
Products
Cart
Profile